The problem of single-chip microcomputer control of Electromagnetic Lock 1. The pins from the Electromagnetic Lock MCU cannot directly control the lock. Usually the method of controlling the unlocking is to use a relay or a power surge to energize and open the lock control. 2. The unlocking time cannot be longer than 1 second. The voltage and current from the pins of the single-chip microcomputer cannot meet the requirements of the lock. Therefore, it is necessary to directly design the peripheral circuit to power on and control the unlocking, and the single-chip microcomputer controls the unlocking time. 3. Use the pins of the single chip microcomputer to unlock the lock. Its disadvantage is that it is easy to burn out the single chip microcomputer, and the voltage and current of the pins of the single chip microcomputer cannot be pushed to unlock the lock.
Electric Control Lock For Logistics Cabinet Product Description 1. Working mode: It adopts the working mode of closing the door (power off) to lock, and powering on (3.3V) to trigger the unlocking at an instant, and the light is on when the door is opened; 2. Emergency unlocking: There are emergency unlocking methods in all directions of the lock body, and the lock can be unlocked without damaging the cabinet in an emergency; 3. A mechanical key can be installed, and it can also be unlocked externally with a mechanical key, and the operation is simple and convenient; 4. Energy saving: the power-on time at the moment of unlocking is less than 1 second, and the power-off state does not consume voltage when the door is closed and locked at ordinary times; 5. Material saving: ultra-thin design saves materials, and at the same time can provide larger and more flexible storage space for cabinets; 6. Long service life: long service life, which can ensure that the switch can reach 500,000 times; 7. Output state: There is a lock state output detection signal for detecting the working state of the door (open, close); 8. Publicity: No front and back design, all sizes of cabinets and drawers in the left, right, up and down opening directions are applicable, and the front lock screws can also be used.
Dongguan Keskin Intelligent Technology Co., Ltd. is a leading expert focusing on intensive smart Electronic Locks. The company integrates R&D, processing and sales; we have a R&D team of more than 30 people. Electromagnetic Locks For Cabinets and other products are exported to Europe, America, Southeast Asia, Japan, Korea and other places. We wholeheartedly provide our customers with better products and services.
