What are the precautions for precision machining?

2023-06-10

1.Before machining precision CNC parts, check whether a part of the movement has been filled with lubricating oil before mechanical work. Then, start and check whether the clutch and brake system are all normal, and idle the machine tool for 1-3 minutes. Do not operate the machine in case of common faults.

2. Maintain the correct posture during work and have sufficient mental substance to cope with the work. If you find yourself feeling unwell, you need to leave your position immediately and report it to the leaders and cadres. During actual operation, it is necessary to have a centralized mindset, prohibit chatting, and cooperate with each other. Operators must avoid operating in a state of anxiety or fatigue to prevent safety accidents and ensure operational safety. All employees should check whether their clothing meets work standards before entering their positions. It is prohibited to wear sandals, high heels, or clothing that endangers safety. Those with long hair should wear a safety helmet.

3. When disassembling and replacing precision parts, first cut off the power, and after the high-speed punching machine movement unit stops running, the installation and adjustment of the Mold can begin. After installation and adjustment, manually move the water pump flywheel to test punch twice, check whether the left and right molds are symmetrical and effective, whether the screws are secure, and whether the edge banding ring is in an effective position.

4. Be sure to wait for all other personnel to leave the mechanical work area and remove any debris from the workbench before turning on the power to start the machine.
dengpaogai

5. When the machine is working normally, it is strictly prohibited to reach into the working area of the slider, and it is prohibited to take or place the workpiece with your hands. When taking and placing workpieces in the stamping mold, it is necessary to use tools that comply with regulations. If any abnormal noise or equipment malfunction is detected in the machinery, the main power switch should be immediately turned off for inspection. After the machine is started, one person should understand the actual operation of the machine. Others should not press the power button or step on the switch board, let alone put their hands into the machine's working area or touch a part of the machine's movement.

6. When leaving work, turn off the power switch and tidy up the finished products, scraps, and debris in the position

Previous: How to install fingerprint locks conveniently and quickly? Next: What is Electronic Locking?