1.
Injection Mold It is mainly a molding mold that is most commonly used in the production of thermoplastic parts. The processing equipment corresponding to the injection mold is an
Injection Molding machine. Under the push of the plug, it enters the mold cavity through the injection molding machine nozzle and the pouring system of the mold, and the plastic is cooled and hardened to form, and the product is obtained by demolding.
Its structure is usually composed of forming parts, pouring system, guiding parts, push-out mechanism, temperature regulation system, exhaust system, supporting parts, etc., and is made of
Plastic Mold steel. The injection molding processing method is usually only suitable for the production of thermoplastic products. The plastic products produced by the injection molding process are very extensive. From daily necessities to various complex electrical appliances and auto parts, they are all formed with injection molds. One of the most widely used processing methods in the production of plastic products.
2. Blow Mold
A mold used to form plastic container hollow products (such as beverage bottles, daily chemical products and other packaging containers). The form of blow molding mainly includes extrusion blow molding hollow molding and injection molding according to the process The principle mainly includes extrusion blow molding, injection blow molding, injection extension blow molding (commonly known as injection stretch blow), multi-layer blow molding, sheet blow molding, etc.
The equipment corresponding to blow molding of hollow products is usually called plastic blow molding machine, and blow molding is only suitable for the production of thermoplastic products. The structure of the blow mold is relatively simple, and the materials used are mostly made of carbon.
3. Extrusion Die
A type of mold used to produce continuous-shaped plastic products, also known as extrusion molding head, is widely used in the processing of pipes, bars, monofilaments, plates, films, wire and cable cladding, profiles, etc.
The corresponding production equipment is a plastic extruder, the principle of which is that the solid plastic is melted and plasticized under the conditions of heating and the screw rotation of the extruder, and is made into the same cross-section as the shape of the die through a die of a specific shape. Continuous plastic products. Its manufacturing materials are mainly carbon structural steel, alloy tools, etc., and some extrusion dies are also inlaid with wear-resistant materials such as diamond on the parts that need to be wear-resistant.
The extrusion process is usually only suitable for the production of thermoplastic products, which is significantly different from injection molds and compression molds in structure.
4.
Blister mold A mold that uses plastic plates and sheets as raw materials to form some simpler plastic products. In the case of softening, it is deformed and attached to the cavity of the mold to obtain the desired molded product, which is mainly used in the production of some daily necessities, food and toy packaging products.
Due to the low pressure during molding, the mold material is mostly made of cast aluminum or non-metallic materials, and the structure is relatively simple.
5. Compression mold
Including compression molding and injection molding two structural mold types. They are a type of mold mainly used to mold thermosetting plastics, and their corresponding equipment is a press molding machine.
Compression molding method According to the characteristics of the plastic, the mold is heated to the molding temperature (generally 103°108°), and then the measured compression molding powder is put into the mold cavity and the feeding chamber, the mold is closed, and the plastic is heated under high heat and high pressure. Soften the viscous flow, solidify and shape after a certain period of time, and become the desired product shape.
The difference between injection molding and compression molding is that there is no separate feeding chamber. Before molding, the mold is closed first. The plastic is preheated in the feeding chamber and is in a viscous flow state. Under the action of pressure, it is adjusted and squeezed into the mold cavity to harden and form.
The compression mold is mainly composed of cavity, feeding cavity, guiding mechanism, ejecting parts, heating system, etc. Injection molds are widely used in packaging electrical components. The materials used in the manufacture of compression molds are basically the same as injection molds.
6. High expanded polystyrene molding die
It is a kind of mold that uses expandable polystyrene (bead material composed of polystyrene and foaming agent) raw materials to form foam packaging materials of various desired shapes.
The principle is that expandable polystyrene can be steamed in the mold, including two types of simple manual operation molds and hydraulic straight-through foam plastic molds, which are mainly used to produce packaging products for industrial products. The materials for making such molds are cast aluminum, stainless steel, bronze, etc.
